Click on image to open expanded view Item No. 51116

Foam-Quat, 18 oz aerosol spray

By VetSolutions
  • In Stock
AutoShip & Save 35%
Save 35% on your 1st AutoShip order and 5% on all future AutoShip orders

Sorry, there is a manufacturer back order on this item.

Product Description
Looking for a potent foaming germicidal spray that can tackle even the toughest viruses and bacteria? Look no further than Foam-Quat! This powerful spray is perfect for use in household and vet office surfaces, and can quickly and easily disinfect and clean your space. Foam-Quat rids HIV-1, Herpes Simplex Virus Type 1 & 2, Canine Parvovirus, Influenza A H1N1, Legionella Pneumophila, and MRSA – so you can rest assured that your surfaces are safe and clean. Foam-Quat can be applied to a variety of surfaces, including glazed porcelain, Formica, glazed tile, vinyl, stainless steel, finished woodwork, and other non-porous surfaces. Plus, this product is great for those with allergies since it does not emit fumes or leave behind any residue.
Who is Foam-Quat, 18 oz aerosol spray for?
This is intended to be used in the following facilities: nursing homes, hospitals, grooming, kennels, animal quarters, pet shops, tack shops, animal life science laboratories.
Active Ingredients(s):
n-Alkyl (60% C14, 30% C16, 5% C18) dimethyl benzyl ammonium chloride 0.10% n-Alkyl (68% C12, 32% C14) dimethyl ethylbenzyl ammonium chloride 0.10%
How is Foam-Quat, 18 oz aerosol spray sold?
18 oz aerosol foam spray
What special precautions are there?
Store this product in a safe place where it is inaccessible to animals and children. Keep it away from flames, heat, and sparks as it is combustible. Do not let the product get near temperatures over 130 degrees Fahrenheit. While administering this product, wear protective gloves, clothing, and eye covering. This product may cause mild irritation to the eyes. Keep it away from your eyes and skin, and do not swallow or allow skin absorption as harm may occur. Before eating, using the bathroom, drinking etc., wash your hands thoroughly.
What to do if overdose?
If overdose occurs, please contact your local pet hospital or emergency pet clinic immediately.
How can I store Foam-Quat, 18 oz aerosol spray?
Keep in a cool and dry environment. The product is kept under pressure so do not puncture, incinerate, store near heat or an open flame. If exposed to extreme heat up to 130°F may cause the product to burst. If the product is empty, dispose product as regular refuse. If partially filled, contact your local solid waste agency for guidance or 1-800-CLEANUP for disposal instructions.
Before using, read the entire label. Use other than label directions is against federal law. Do not use this product as a sterilization or disinfectant agent for instruments or surfaces that touch the human body in areas like the bloodstream, mucous membranes, other sterile places. However, it is approved for use to clean or decontaminate before proper sterilization methods. If using this product on surfaces that touch food, before normal use of the surface and after using this solution, rinse with potable water. Never use this product on bowls, glasses, eating tools, it is for hard surfaces only. For non-porous areas like countertops, showers, tables, lamps etc. shake the bottle before use. Then, after shaking, hold the canister upright 6 inches away from the surface. Spray the area until covered, leave for 10 minutes, and then wipe or mop dry. There is no need to scrub, however, if a surface is very dirty or soiled, remove the debris before application. For places that animals spend a lot of time like clinic waiting rooms, clinic tablets, kennels etc. prep the area by removing the animals, the litter, and food sources from the space. Then, use the same method as described above. If using this product to control mildew, wet the surface of the area with this product. Such areas will likely be, the floor, wall, tabletop etc. Once applied allow the product to air dry. Repeat this process every week or so. To clean up body and blood fluids, always wear full protective gear, then carefully soak up the mess. Once the mess is cleaned and removed, apply this product and allow it to sit for 10 minutes. Follow the soak time by wiping or mopping away the product. After application and cleaning, throw away all protective coverings and materials in accordance to federal, state, and local regulations.
Main Ingredients
Active Ingredients: n-Alkyl (60% C14, 30% C16, 5% C18) dimethyl benzyl ammonium chloride 0.10% n-Alkyl (68% C12, 32% C14) dimethyl ethylbenzyl ammonium chloride 0.10% OTHER Ingredients:99.80% TOTAL: 100.00% Ingredients: (CAS#): Water (7732-18-5), 2-Butoxy Ethanol (111-76-2), Propane/n-Butane (68476-86-8), Isopropyl Alcohol (67-63-01), EDTA (60-00-4).